HomeNewsArticle Display

23d CES powers Moody up

A photo of Airmen looking at a sheet.

Airmen assigned to the 23d Civil Engineer Squadron look at a termination specification sheet before operation Feb. 28, 2020, at Moody Air Force Base, Georgia. The electric and alarms shop are responsible for the maintenance and replacement of high-voltage distribution switches to ensure proper flow of electricity to buildings around Moody. (U.S Air Force photo by Airman 1st Class Elijah M. Dority)

A photo of an Airman moving wire under a high-voltage distribution switch.

Airman 1st Class Tyler Adam, 23d Civil Engineer Squadron electrical systems technician, realigns wires connected to a high-voltage distribution switch Feb. 28, 2020, at Moody Air Force Base, Georgia. The electric and alarms shop are responsible for the maintenance and replacement of high-voltage distribution switches to ensure proper flow of electricity to buildings around Moody. (U.S Air Force photo by Airman 1st Class Elijah M. Dority)

A photo of Airmen digging up dirt

Airmen assigned to the 23d Civil Engineer Squadron clean out dirt from an old high-voltage distribution switch location Feb. 28, 2020, at Moody Air Force Base, Georgia. The electric and alarms shop are responsible for the maintenance and replacement of high-voltage distribution switches to ensure proper flow of electricity to buildings around Moody. (U.S Air Force photo by Airman 1st Class Elijah M. Dority)

A photo of an Airman putting on gloves.

Staff Sgt. Brendan Powers, 23d Civil Engineer Squadron electrical systems journeyman, puts on protective gear Feb. 28, 2020, at Moody Air Force Base, Georgia. The electric and alarms shop are responsible for the maintenance and replacement of high-voltage distribution switches to ensure proper flow of electricity to buildings around Moody. (U.S Air Force photo by Airman 1st Class Elijah M. Dority)

A photo of an Airmen assembling a high-voltage meter

Staff Sgt. Brendan Powers, 23d Civil Engineer Squadron electrical systems journeyman, assembles a high-voltage meter Feb. 28, 2020, at Moody Air Force Base, Georgia. The electric and alarms shop are responsible for the maintenance and replacement of high-voltage distribution switches to ensure proper flow of electricity to buildings around Moody. (U.S Air Force photo by Airman 1st Class Elijah M. Dority)

A photo of two individuals putting a high-voltage meter to a voltage distributor

Cade Siebenaler, left, 23d Civil Engineer Squadron high-voltage electrician, and Staff Sgt. Brendan Powers, 23d CES electrical systems journeyman, check a high-voltage distribution switch to see if it’s live Feb. 28, 2020, at Moody Air Force Base, Georgia. The electric and alarms shop are responsible for the maintenance and replacement of high-voltage distribution switches to ensure proper flow of electricity to buildings around Moody. (U.S Air Force photo by Airman 1st Class Elijah M. Dority)

A photo of an Airman operating a crane

Staff Sgt. Brendan Powers, 23d Civil Engineer Squadron electrical systems journeyman, operates a crane Feb. 28, 2020, at Moody Air Force Base, Georgia. The electric and alarms shop are responsible for the maintenance and replacement of high-voltage distribution switches to ensure proper flow of electricity to buildings around Moody. (U.S Air Force photo by Airman 1st Class Elijah M. Dority)

A photo of an Airman wrapping black tape around a wire

Staff Sgt. Joshua Boone, 23d Civil Engineer Squadron electrical systems journeyman, identifies wires connected to a high-voltage distribution switch Feb. 28, 2020, at Moody Air Force Base, Georgia. The electric and alarms shop are responsible for the maintenance and replacement of high-voltage distribution switches to ensure proper flow of electricity to buildings around Moody. (U.S Air Force photo by Airman 1st Class Elijah M. Dority)

MOODY AIR FORCE BASE, Ga. --